You surely know the importance of maintaining and checking the correct condition of aircraft and airplanes. The aviation sector is characterized by very demanding policies and practices in terms of both safety and aircraft cleaning and proper maintenance and everything related to these areas.

Main Aviation manufacturers, including Boeing and Airbus, prioritize safety above all else, so it is normal for planes to be in perfect condition before taking to the skies.

Cleaning and maintaining these appliances is essential to ensure their correct operation. For this reason, it is mandatory to use cleaning products that must meet a series of requirements in the form of a test to be used on aircraft surfaces.

These products are special and must be adapted to clean delicate and at the same time resistant surfaces such as turbines, engine fairings, landing gear, wheel wells and aircraft bellies, among others.

These articles, in particular, the Aircraft degreaser is key to ensure deep and effective cleaning, and to prevent corrosion of the surface that is in contact with air for most of its life.

To know how to use the different airplane cleaning products that exist, we have prepared this Complete guide to aircraft cleaning and everything you need to know about aviation products.

Aircraft cleaning: why is it different from other sectors?

Each sector has its own challenges, requirements and standards regarding industrial cleaning and maintenance. But If we had to highlight one in particular for its high demands and superior level cleaning this would be the aeronautical sector.

Cleaning in aviation presents challenges that do not occur in other sectors. Aircraft interiors and exteriors are exposed to a variety of elements, including dust, dirt, grime, grease, and even insect infestations.

Furthermore, the High passenger turnover, short turnaround times and limited access to specific areas further increase the complexity of the cleaning process..

Below, we will tell you the reasons why Aircraft cleaning differs from other sectors and why it is essential for the aviation industry

Aircraft cleaning and maintenance is a fundamental task in aviation, as it guarantees the safety and comfort of passengers and crew.

High hygiene requirements

The aviation sector is characterized by a policies and demands that are higher than those of other industrial environments, even those considered dangerous such as furnaces or steelworks.

La The aeronautical industry has very high hygiene requirements. because cleaning and disinfection tasks are synonymous with safety in the facilities of these industries.

This is due to several factors, including the following:

• Aircraft are exposed to adverse weather conditions and the completion of a certain number of flight hours that should be reviewed continuously.
• The use of delicate materials inside the chassis like gold and other materials must be protected. parts exposed to the air.
• Materials and surfaces which must be treated specially with special products to repel static electricity.

Strict regulations and safety

Cleaning and disinfection tasks are synonymous with safety in the facilities of these industries. One of the main reasons why aeronautical cleaning is different from other sectors is the strict regulations and safety protocols involved.

Aviation authorities, such as the Federal Aviation Administration (FAA), the International Civil Aviation Organization (ICAO) and the European Aviation Safety Agency or EASA, have specific guidelines for aircraft cleaning.

These regulations are intended to ensure passenger safety, maintain aircraft performance and prevent the spread of disease. This applies to both exterior and interior cleaning and maintenance when it comes to repairing and servicing all aircraft.

In many In some cases, highly technical processes are carried out, such as ultrasonic cleaning. for small parts or components or dry ice cryogenic cleaning for conduits, electrical panels or motors.

Cleaning products: degreasers for aircraft and other items

An example of the difference in cleanliness between an aircraft engine and one in the automotive or other sectors is compliance with the guidelines set by aviation safety authorities such as AENA.

These organizations require compliance with a series of standards for disinfecting and inspecting equipment. For example, the cleaning products that operators must use must meet the following characteristics:

• It should take a few rigorous tests.
• Not to be caustic to avoid damaging the surfaces and if possible be biodegradable.
• They must comply with Certifications of the main aviation manufacturers like Boeing and Airbus.
• Certain materials used in aircraft construction require special care. For example, aircraft windows must be cleaned with specific solutions that do not damage the protective coatings or scratch the glass.
• Act quickly. monitor the use of water and cleaning products to prevent damage to electrical systems and sensitive equipment.

Necessary products and recommendations:

For surface hygiene in the aeronautical industry Effective cleaning solutions should be used against residues of fat or oils as a dry degreaser for aircraft and/or similar.

In addition, surface-friendly disinfectants, non-woven fabric for applying detergents and disinfectants, and personal protective equipment for workers and staff are used, just as in other sectors.

Types of aircraft cleaning

Aircraft cleaning is divided into two types:

• Reduced cleaning: It is carried out throughout the rotations of the aircraft and its efforts are focused on cleaning floors, removing garbage, cleaning and disinfecting toilets, basic cleaning of seats with their pockets and spraying air freshener in the cabin.
• Deep cleaning: It is done periodically and coincides with the most extensive maintenance stops, both inside and outside.

As you have been able to verify Aircraft cleaning is a specialized field that is distinguished from other sectors by its unique challenges., its strict regulations and safety considerations.

And it is an industry that requires great attention to detail and Compliance with industry standards is not only to ensure cleaning and hygiene, also to ensure the life of the personnel on board, as well as the duration and increase of the useful life of the aircraft.

With this we hope that you have enjoyed this article in the form of a guide on aircraft cleaning and we invite you to visit our blog where you can find more advice on everything related to the industrial cleaning.