Exposed Brick Degreaser Cleaner – NETOX F

With a high wetting power, it penetrates all pores and fissures, breaking up and loosening the cement and exerting a chemical reaction on it to dissolve it. Excellent degreasing power.
Removes mud, cement and plaster from the exterior bricks of buildings.
Removes limescale deposits, iron stains, mould and rust from granite, marble, brick and cement facades. Restores the original colour to brick and concrete floors and facades, discoloured by use and atmospheric erosion.
Always dilute with water; soak the area to be cleaned well with the solution, leave it to act for a few minutes and then rinse with plenty of water. When necessary, scrub with a strong brush.
Depending on what needs to be cleaned, where it is attached, degree of dirt, etc., the dilution will vary, so a few guidelines are given below: To clean granite or artificial stone facades:
1st Mix with water approximately 50%.
2nd Spray this mixture, soaking generously.
3. Scrub vigorously with a metal bristle brush. 4. Rinse with water at the highest possible pressure.
To remove saltpeter from exposed brick:
1st Soak well with water.
2nd Apply a guideline dilution of 1x6.
3rd Scrub with brush.
4th Rinse with water.